Electromagnetic Compatibility (EMC), as we know, is the ability of equipment and systems to function as designed in their intended operational environment without adversely disturbing or being affected by other equipment or systems. Electromagnetic Compatibility (EMC) has become a topic of extreme concern for manufacturers and users of electronic products in the Global Market. Design of an electronic equipment to comply with National/International EMC Standards Calls for the reduction of its immunity to external EMI. Undesired emissions may originate from equipment at the component, PCB and enclosure levels. Keeping in mind the EMC testing needs of the industry in the western region of the country, SAMEER has decided to set up EMI/EMC facilities at their MUMBAI Centre.



  • Conducted Emission (CE) as per IEC/FCC/CISPR/VDE/VCCI/IEEE standards
  • Radiated Emission Testing as per CISPR-11, CISPR-22 (EN 55022)
  • IEC/EN 61000-3-2 (Harmonics Emission)
  • IEC/EN 61000-3-3 (Flicker emission measurements)
  • EMI susceptibility Test set up as per IEC and EN standards for the following tests:

    1. IEC/EN 61000-4-2 (Electro Static Discharge immunity test)
    2. Radiated Susceptibility Testing as per IEC/EN 61000-4-3
    3. IEC/EN 61000-4-4 (Electric Fast Transient immunity test)
    4. IEC/EN 61000-4--5 (Surge immunity test)
    5. IEC/EN 61000-4-6 (RF conducted susceptibility test)
    6. IEC/EN 61000-4-11 (Voltage dips and interruptions)
    7. IEC/EN 61000-4-12 (Ring & Oscillatory wave immunity test)
    8. IEC/EN 61000-3-2 (Harmonics Emission)
    9. IEC/EN 61000-3-3 (Flicker measurements)
    10. Facility to measure Magnetic Field Susceptibility/Emissions using H-Coil as per IEC/EN 61000-4-8/CISPR-15 respectively.


EMI EMC Calibration

The facilities to carry out the testing as per MIL-461-C/D/E are under way.

Few of the tests are presently available [as per MIL-461-C: CE 03, CS 01, CS 02, CS 06, RE 02 (14 kHz-2 GHz), RS 03 (200 kHz-1 GHz); as per MIL-461-E: CE 102, CS 101, RE 101 (9 kHz to 100 kHz), RE 102 (10 kHz to 1 GHz), RS 03 (200 kHz to 1 GHz)]


  • Services to carry out ambient noise survey
  • Testing/measurements at customer's site.
  • EMC Consultancy services for various systems/projects.
  • Shielded chamber validation (viz., shielding effectiveness, site attenuation measurements, field uniformity tests)
  • Facility for PCB, sub-system noise (EMI) mapping using near field probe sets.
  • General/Customised EMC training programs.
  • Third party evaluation / guidance for selection of electronic products in view of EMI/EMC related aspects.



Sector-7, Rain Tree Marg,
Pincode - 400 614.

  • (+91)-22 2759 3121, 2756 4056
  • (+91)-22 6514 7072
  • (+91)-22 2756 4056


  • (+91)-22 2756 4062
  • (+91)-22 2572 3254


EMI - EMC and Calibration Services